!
Safety and Care Advice
Important
- Please read these instructions fully before starting assembly
Care and maintenance
Note !
• This childs bed conforms to BS 8509:2008 +A1:2011.
• Age recommendation: from 3 year to 12 years.
• Mattress in size 90x190 cm to be used with this bed.
• Children are likely to play, bounce ,jump and climb on beds, therefore the childs bed should not
be placed too close to other furniture or windows, and should be placed either tight to any wall or
have a gap 300mm between the wall and the side of bed.
• Any additional or replacement parts are obtained from the manufacturer or distributor.
1
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not recommend the use
of power drill/drivers
for
inserting screws
, as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly
.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Note:
if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page
with these instructions for
future reference.
