Assembly Instructions
Step 4
Fixing to wall
It is recommended that
the unit is fi xed to a wall
Fix wall strap
C
to the
back of the unit using
15mm screw
A
and
15mm washer
B
.
Warning:
The
15mm screw
A
is for fi xing the
wall strap
C
to furniture
only. In addition to this
you will need to choose
a screw or fi tting which is
suitable for securing the
wall strap
C
to the type
of walls you have. If you
are unsure about what
type of screw to use seek
professional help.
7
Step 5
A
A
B
C
1
3
Adjusting doors
1. To adjust the height /
level of the door loosen
all screw ‘A’s on all hinge
plates, level the door
height and retighten all
screw ‘A’s.
2. To adjust the gap
between the doors
loosen screw ‘B’, then
turn screw ‘C’ clockwise
to close the gap or
anticlockwise to increase
the gap. Re-tighten
screw ‘B’ to lock position.
3. To adjust the distance
away from the unit
loosen screw ‘B’, this
allows the hinge arm
to slide back and forth.
Adjust as required then
re-tighten screw ‘B’.
Assembly is complete.
2
C
Using the correct type of
screw, screw through the
washer and wall strap
into a pre-drilled hole in
the wall
Back Panel
Unit Top
A
B
