Assembly Instructions
7
Step
9
E
B
Fit the top and fit the
4 plasinails
Push the top onto
the assembly.
Use a screwdriver to
tighten the 4 large
locking nuts fitted to
the inside of the side
panels and .
Note:
Turn the large
locking nuts as far as
they will go - more than
1/2 a turn.
Tap 2 plastic nails
into the bottom edge of
each of the sides and
. .
3
E
1
2
E
Fit the back
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the sides
and bottom edges of the
back .
Note:
Nails should
be spaced about 150mm
apart.
Stand the unit up for
the next step.
8
D
8
Step
8
1
3
2
Finished
front edge
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
y
x
y
b:
D
8
Fit the 4 plastic nails
Tap 2 plastic nails
into the bottom edge of
each of the sides and
. .
L
1
2
L
L
L
L
L
1
2
x
