Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
and quote the reference numbers on the component pages.
Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW
15
ALR3025
Step
27
Secure unit to a wall
To prevent possible
overbalancing we
recommend that this unit
is secured to a suitable
wall by use of the metal
bracket fitted to the
top .
Fixings are not supplied
as they will need to suit
the wall type, and the
length of screw will
depend on the distance
of the back of the unit to
the wall.
O
3
Fit the drawers
Starting with the bottom
drawer, slide both the
runners forward and
locate the drawer
sides and
between them, lining up
the holes in the drawer
wrap with the 2nd
'threaded' holes in the
runners .
Working from the inside
of the drawer, insert 2
screws through the
drawer sides and out into
the 2nd threaded hole in
the runner.
Assembly is complete
J
P
P
2nd threaded
hole
P
J
11
12
Step
28
J
J
Warning:
Take care when
drilling the wall that you do not
drill into any pipes, wires etc.
If in doubt, consult an expert.
Note:
Do not overtighten the screws.
If they catch on the runner you may
need to loosen them slightly.
8
9
11
12
Remember:
The small
right drawer front has a
shallow identification
mark (refer to Step 1).
WALL
WALL
Top of unit
O
J
J
11
12
Remember:
The small
right drawer front has a
shallow identification
mark (refer to Step 1).
8
9
