18
Step
28
Assembly Instructions
a:
Secure the unit to a
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
overbalancing this unit
must be secured
to a
suitable wall by fitting of
the overbalance
protector kit to a wall.
b:
Push the unit up
against the wall and slide
the bracket against the
wall. Fit the 2nd screw
into the underside of the
top panel.
Mark the slot at the back
of the bracket for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Note:
Take care when
drilling the wall that you
do not drill into any pipes,
wires etc.
If in doubt, consult an
expert.
WARNING!
In order to prevent overturning
this product must be used with the
wall attachment device provided
Q
b:
Q
Back
Top
Q
Top
See the next page for a guide
to wall mounting and fixings
CR
CR
Q
