Assembly Instructions
Assembly Instructions
Stage 2 –
Fitting the Top Panel
Stage 1 –
Fitting the Tracks
There are many different
kinds of Screws and
Panels. Ensure you check all
before assembly.
Check Before Assembly
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Screws
D
to fix the Tracks
N on the Right Side Panel H .
See fig. 1 and 2.
3. Use the same method as in
fig. 1 and 2 to fix the Tracks
on the Left Side Panel J .
NOTE: Ensure the Screws
D
are
located using the centre of the
three locating holes.
NOTE: The front part of the Track
should be approximately 1.5cm
from the edge of the panel.
NOTE: It would be useful to ask
someone to help you at this
stage.
CAUTION: Always check
the assembly method is correct
before applying Glue.
1. Place a small amount of Glue
J
into the dowel holes. Then
insert Dowels
C
into the Top
Panel A .
See fig. 3.
3. Place a small amount of Glue
J
into the dowel holes. Then
insert Dowels
C
into the
Bottom Support G .
See fig. 5.
2. Place a small amount of Glue
J
into the dowel holes. Then
insert Dowels
C
into the
Middle Support F .
See fig. 4.
2. Slide the Tracks to other side. Then
use Screws
D
to fix the front end
of the Tracks.
See fig. 2.
J
A
fig. 3
C
C
J
F
fig. 4
C
C
J
G
fig. 5
C
C
Front
fig. 1
D
H
N
D
fig. 2
