Assembly Instructions
13
Step
19
a:
b:
c:
d:
C
D
C
C
B
C
D
D
D
A
D
C
B
The Hinge Arm must be flat
against the Hinge Plate
prior to any adjustment.
Press the front of
the Hinge Arm
down onto the
Hinge Plate until it
‘CLICKS’ into place.
To seperate the Hinge Arm and Plate
press the button at the end of the Arm,
and lift the Hinge Arm off the Plate.
CLICK
LIFT
Locate the hooks on the
Hinge Arm underneath the
front of the Hinge Plate.
Press the front of
the Hinge Arm
down onto the
Adjust the doors if
needed
a:
Before adjusting the
doors, use a spirit level
to check the top (or
base) of the unit is level,
front-to-back and side-
to-side in the 3 positions
shown.
Use suitable packing
pieces (not supplied) to
make the unit level
BEFORE making any
adjustment to the hinges,
as shown.
b:
Height adjustment.
Loosen screws A on
hinge plates and move
door up or down as
required.
Retighten screw A.
c:
Forward and Back
adjustment
.
Loosen screw B on hinge
plate and move door in
or out as required.
Retighten screw B.
d:
Sideways
adjustment
.
To move door ‘out’
loosen screw C.
To move door ‘in’ tighten
screw C
b:
c:
d:
a:
A
A
B
C
