Argos Canterbury 3 DR Robe, Руководство по сборке

Страница: 10 / 27

Assembly Instructions
Step 7
Fittings you will need for this step:
Flat head screw
# 25233 X4 Flat head screw
# 26020 X8 Drawer runner
# 41434 X4
Bottom
GB
GA
Place drawer runners
1.
Extend drawer glide
41434 .
2.
Attach drawer glide at
the front of small divider
panel
GA .
Place screw 26020
through the correct hole
at the front of the drawer
glide, into the holes on
the small divider panel
GA .
Tighten screw but do not
overtighten.
3.
Open slide until 3 holes
is visible at back of
drawer glide.
4.
Place screw 26020
through the correct holes
at the back of the drawer
glide, into the holes on
small divider panel
GA .
Tighten screw but do not
overtighten.
5.
Attach the fl at head
screw
25233 into the
correct holes of the
drawer glide, into the
small divider panel
GA .
Tighten screw but do not
overtighten.
Repeat these 5 steps for
the remaining runners on
the other side of small
divider panel
GA and
on both sides of large
divider panel
GB .
Front
Front
9