Argos Camden 264/9971 Скачать руководство пользователя страница 14

If you need help or have damaged or missing parts, call the 

Customer Helpline: 08456 400800

and quote the reference numbers on the component pages.

Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW

Assembly Instructions

13

Step

 

15

WALL

WALL

Back of Unit

Attach bracket to top

To prevent possible 

overbalancing, we

recommend that this unit 

is secured to a suitable 

wall by use of the 

bracket      fitted to the 

top of the unit.

Fixings are not supplied, 

as they will need to suit 

the wall type and the 

length of screw will 

depend on the distance 

from the back of the unit 

to the wall.

Fit the bracket      loosely 

onto the top of the unit, 

fixing screw      between 

10 and 15mm in from the 

back edge, and mark the 

wall for the wall fixing.

Swivel the bracket    

away from the wall and 

drill a hole in the wall 

using a suitable drill bit 

and fit your wall fixing.

Swivel the bracket    

back and fix the bracket 

to the wall, then tighten 

Screw     .

Note:

 

Take care when 

drilling the wall that you 

do not drill into any 

pipes, wires etc.

If in doubt, consult an 

expert.

Warning:

 The 

robe is heavy. 

Lift with care.

Assembly is complete

K

K

J

K

K

J

K

J

K

10-15mm

Top of Unit

Содержание Camden 264/9971

















Отзывы: