Argos Camden 264/9971 Скачать руководство пользователя страница 1

MADE IN 

BRITAIN 

Dimensions

Width - 79.5cm

Depth - 49.5cm 

Height - 183.5cm

Camden - 

2 Door Robe 

Assembly Instructions -

 Please keep for future reference

If you need help or have damaged or missing parts, call the 

Customer Helpline: 08456 400800

Issue 4 - 24/03/14

Important -

 Please read these instructions fully before starting assembly

Ruler -

 Use this ruler to help correctly identify the screws

0

10

20

30

40

50

60

70

80

90 100 110 120 130 140 150 160 170

266/1021

264/9971

ALR2982

Step

 

9

y

x

y

y

x

Warning:

 The 

robe is heavy. 

Lift with care.

8

D

Fit the back panel

a:

 

Square up the unit by 

making sure that 

measurement 

x to x 

equals y to y.

b:

 Place the back       

onto the unit, coloured 

surface facing down.

Note:

 The back must be 

positioned so that it is 

central on the unit.

Nail      around the 

outside edges of the 

back      .

Note:

 Nails should try to 

be spaced out evenly.

Stand the unit up for 

the next stage.

8

D

8

The measurement from top corner X to bottom corner X must be 

equal to the measurement from top corner Y to bottom corner Y

The back must be 

positioned central on the unit 

- same gap on each side

a:

b:

8

8

=

=

Misaki 2 Door Robe

Due to continuous improvements to our products, please follow the 

instructions below for fitting the back panel.

Issue 2 - 12/12/12 - Assembly method changed - Top is now fitted before the Left Side has been fitted.

Issue 3 - 12/12/13 - Extra Cat code added.

Issue 4 - 24/03/14 - New Cat codes.

Содержание Camden 264/9971

















Отзывы: