Argos Camden 259/3773 Скачать руководство пользователя страница 23

If you need help or have damaged or missing parts, call the 

Customer Helpline: 08456 400800

and quote the reference numbers on the component pages.

Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW

Assembly Instructions

22

Step

 

32

Assembly is complete

IMPORTANT INFORMATION ABOUT THIS PRODUCT

This product complies with the requirements of BS 7449:1991 and has been 

manufactured by 

DECORATIVE PANELS FURNITURE LTD, TEESSIDE 

INDUSTRIAL ESTATE, THORNABY-ON-TEES, CLEVELAND, TS17 9LT

.

The product code for this unit and the item code(s) for the glass 

components are listed in the Assembly Instructions along with a description 

of the type of glass used. All clear/tinted glass complies with the 

requirements of BS 6206 Class A. All mirrors comply with the requirements 

of BS 6206 Class C. If the glass component contained in this unit is chipped 

or broken consult the furniture manufacturer, retailer, or agent with regard to 

obtaining a manufacturing specification and shape for replacement glass 

quoting the unit description and batch number or date of manufacture. 

Do not place very hot or very cold items against or in close proximity to 

glass surface(s) unless adequately thick insulating material is used to 

prevent such items coming in contact with the glass.

Do not strike the glass with hard or pointed items.

Do not sit or stand upon horizontal glass surfaces.

When cleaning glass panels use a damp cloth or leather with washing up 

liquid or soft soap if necessary - do not use washing powders or any other 

substance containing abrasives since these substances scratch glass.

If stated in the instruction leaflet, it is essential that this unit is fixed to a wall.

KEEP THESE INSTRUCTIONS FOR FUTURE USE

Warning:

 The 

unit is heavy. 

Lift with care.

Содержание Camden 259/3773

























Отзывы: