Assembly Instructions
Step 1
Assembly frame
Step 2
Important:
Do not fully
tighten all screws
until assembly is
complete.
C
A
1
2
Place the table top 1 on
a non-abrasive surface,
such as carpet ,with the
underside facing up. Insert
the legs 2 into the plastic
holders attached on the
back of the table top
rim 1 .
Mount and align the center
connector 3 to the middle
of the legs 2 , then fasten
them by using washers
and screws .
A
C
3
E
Important:
Make sure the
plastic support
not detached from
leg tube.
E
2
2
3
2
1
Suggest to complete this
product assembly by two
person.
3
1
