Argos Atlas 145/7229 Скачать руководство пользователя страница 38

Страница: 38 / 40

Assembly Instructions

Step

NOTE

The unused fittings from this assembly are used to fit the doors.

Please refer to the instructions packed with the doors.

IMPORTANT

This unit MUST be fixed to a wall using both

of the overbalance protector kits supplied.

The unit must be level and square before

fitting the overbalance protector kits.

Fit both of the over-

balance protector kits

To prevent possible

overbalancing we

recommend that this unit

is secured to a suitable

wall by fitting of both of

the overbalance

protector kits to the

unit, or an alternative

fixing method of your

choice.

Wall fixings are not

supplied as they will

need to suit the wall

type.

Note:

Take care when

drilling the wall that you

do not drill into any

pipes, wires etc.

If in doubt, consult an

expert.

WALL

Wall fixing

(not supplied)

Screw

(not supplied)

Washer

Strap

Washer

Screw

TOP OF UNIT

Содержание Atlas 145/7229









































Результаты поиска

Содержание Atlas 145/7229

Отзывы:

Бренды по названию

Популярные бренды

Argos Atlas 145/7229, Руководство по сборке

Результаты поиска

Содержание Atlas 145/7229

Отзывы:

Бренды по названию

Популярные бренды