Place shelves starting at the
bottom as you build each layer.
Gently tap the top of the shelf
around each corner with a rubber
mallet until tabs are flush with slots.
This unit can be assembled upright
(vertically) or side-by-side (horizon-
tally).
For Vertical Assembly
3
Attention please:
Please wear the gloves when insert the
connectors to avoid any harm for your hands And
don't put your hands in the connection position.
• The vertical direction is assembled with the
connector (E), as shown in the figure.
• Repeat this process until all four columns are
assembled
.
• Continue to install the shelves until they are
finished.
