Issue date: 27/03/2007
Revision number: 3
ASSEMBLY – STAGE ONE
Front / Base / Sides assembly.
1. Attach part ‘A’ Back Panel
to part ‘C’ Base using 3
screws.
The screws should only be
screwed in 2 or 3 turns until
ALL panels are in place. Then
fully tighten all the screws.
Note: Poke the sea grass to
find the screw hole. The
screws go through these
holes to secure the panels.
See drawing opposite.
2. Attach parts ‘E’ & ‘F’ Side
Panels to Base / Rear panel
assembly using 6 screws.
Ensure that the handles are
on the outsides, & that the lid
securing chain fixings are
near the back panel.
