2
a:
b:
3
c:
Note:
The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
call the
Customer Helpline: 08456 400800
Tools required
Phillips screwdriver
(medium & large)
26mm Screw x 8
A
Assembly Instructions
Step 1
b:
Carefully fit the Tube
clamps
onto the ends
of assembled Tubes.
Align the screw with the
hole in the tube, then
tighten the clamp enough
to hold it in position,
while still allowing the
inner tube to slide.
c:
Firmly insert End caps
into the ends of the
Sides .
.
1
1
1
1
4
5
5
5
2
2
4
5
3
2
Finishing the Tubes
a:
Slide tubes
into
Tubes
