background image

Never cover a barbecue until it has completely cooled. 
WARNING: Do not use lava rock as this barbecue uses a heat diffuser plate.  
Leak test annually, and whenever the gas bottle is removed or replaced. 
The gas valve is not sold as a spare part, if a gas valve fail to function a new gas rail 
need to be replaced. 
If you have any queries regarding these instructions, contact your local dealer. 
 
 

B. Gas and Regulator 

This barbecue uses propane LPG bottled gas. Propane bottles, normally red 
colored, will supply gas all year round, even on cold winter days. A spanner 
may be required to change gas bottles. For propane, we recommend bottle 
sizes of 6 kg or 15 kg. The bottle should never be stood on the bottom shelf.       

Suitable regulator for propane must have an outlet pressure of 37mbar.

 YOU MUST 

HAVE THE PROPER REGULATOR AND BOTTLE IN ORDER FOR THE 
BARBECUE TO OPERATE SAFELY AND EFFICIENTLY. USE OF AN INCORRECT 
OR FAULTY REGULATOR IS DANGEROUS AND WILL INVALIDATE ANY 
WARRANTY. 

Please consult your local gas dealer for the most suitable gas bottles 

and regulators. 

 
   

C. Installation 

 

1. Selecting a Location 
This barbecue is for outdoor use only and should be placed in a well-ventilated area. 
Take care to ensure that it is not placed under any combustible surface

 

The sides of 

the barbecue should NEVER be closer than 1 meter from any combustible surface. 
Keep this barbecue away from any flammable materials!   
 

 

2. Precautions 

Do not obstruct any ventilation openings in the barbecue body. Position the gas 
supply bottle on level ground next to the barbecue and safely away from any source of 
heat. Should you need to change the gas bottle, confirm that the barbecue is switched 
off, and that there are no sources of ignition (cigarettes, open flame, sparks, etc.) near 
before proceeding. Inspect the gas hose to ensure it is free of any twisting or tension. 
The hose should hang freely with no bends, folds, or kinks that could obstruct free 
flow of gas. Apart from the connection point, no part of the hose should touch any hot 
barbecue parts. Always inspect the hose for cuts, cracks, or excessive wear before 
use. If the hose is damaged, it must be replaced with hose suitable for use with LPG 
and meet the national standards for the country of use. The length of the hose shall 
not exceed 1.5m. 

N.B.-The date on U.K. orange hose is the date of manufacture, not 

Содержание 84840














Отзывы: