3
4
4
2
1
2
A
A
A
A
3
1
A
A
Assembly Instructions
Step 1
Step
2
Attaching seat pad
Attaching backrest
Position the backrest
as shown. Align the holes
and fix together using
bolts .
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
4
A
Important:
Two persons are
required to hold
on the frames to
assist the
assembly.
Do not tighten the
bolts at this stage.
Important:
Make sure that
the arrow on the
back of the
backrest is
pointing up as
shown in the inset
diagram.
Do not tighten the
bolts at this stage.
Aligning the legs
Assembly is complete.
Place the chair on a flat
surface and make
adjustments to ensure
the legs are even on the
floor. Then fully tighten all
the bolts.
3
1
A
A
A
A
A
Very important:
Please pay
particular attention
to the assembly of
the chair legs to
ensure that the
screw holes face
forwards
otherwise the
backrest cannot
be attached.
holes must
face forwards
2
2
Place the seat pad on
a raised protected
surface.
Position the back post of
upper leg on the left
and the back post of
lower leg on the right
as shown. Align the holes
and fix together using
bolts .
3
2
1
A
