Assembly Instructions
Stage 1 - Fitting the Support Frame
NOTE: It would be useful to ask someone
to help you to assembly this unit.
4. Attach the top panel (F) to assemble the
1. Attach the divider (C) to base panel (G)
frame, using screws & wooden dowels
with wooden dowel (M), and then attach the
(O&M) (See Fig. 4).
side shelf (H) to the divider with wooden
dowels (See Fig. 1).
Make sure that the back panel is located
properly in the groove in the top panel
before tightening the screws.
2. Attach the R side panel (B) to the unit use
wooden dowel(N) first, and then fit it to the
base panel with assembly screw(O).
5. Insert the screw cover caps (S) over the
Fit the L side panel (A) to the unit with
holes in the L side & R side panels (A&B).
assembly screw(O) too. (See Fig.2).
Ensure that the grooves in the side panels
face inwards and are aligned with the
groove in the base panel.
6. Fit the door catch (T) into the circular
recesses in the door (E),securing with
screws (P), and then attach the door panel
(E) to the cabinet by using door hinges &
3. Insert the back panel (D) by sliding it into
hinge screws (J&K).(See Fig.5).
the grooves of the side panels (See Fig. 3).
Ensure that the laminated white surface
is facing inwards and the holes are
positioned as shown.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
