Argos 397/9468, Инструкция по сборке/Руководство по эксплуатации и уходу

Страница: 17 / 24

Assembly Instructions
16
Step 28
7
9
5
1
y y
y y
x x
Fit the 2 back panels
a:
Square up the unit by
making sure that
measurement x:x equals
y:y.
Place the small back
and large back ,
coloured surface facing
down, onto the unit as
shown.
Make sure that the 2
backs are pushed up
tight against each other
and that they meet in the
centre of the divider’s
back edge.
b:
Nail around the
outside edges of the 2
backs.
Note: Do not nail where
the 2 backs meet.
c:
Push the nail screws
. through the back
holders and tap them
down between the small
back and large back
. and into the back
edge of the divider .
Keep tapping the nail
screws in until the
back holders dig into
the small and large back.
Stand the unit up for
the next step.
20
21
L
P
Q
20
21
10
P
Q
Warning: The
unit is heavy.
Lift with care.
Note: If ever you need to take
the backs off to dismantle the
unit, the nail screws can be
taken out using a screwdriver.
P
Q
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
Note: These can
also be round
Q P
+
c:
P
Q
20
21
Q
b:
L
20
21
x x