Assembly Instructions
11
Step
19
Finished
front edge
Finished
front edge
Prepare the divider
a:
Place a runner on
the divider as shown.
Slide back the top of
runner and use the 1st
hole from the front to fit
the 1st screw .
b:
Slide the runner
back the other way and
fit the 2nd screw into
the corresponding hole
in the divider .
Insert 2 large locking
nuts into the divider
. .
Turn the divider over
c:
Place a runner on
the divider as shown.
Slide back the top of
runner and use the 1st
hole from the front to fit
the 1st screw .
d:
Slide the runner
back the other way and
fit the 2nd screw into
the corresponding hole
in the divider .
10
I
I
E
10
10
J
J
10
I
I
10
J
J
a:
b:
c:
d:
I
E
E
Note:
Due to the manufacturing process, the 2 holes for
the large locking nut can be on either surface of the divider.
Finished
front edge
I
Finished
front edge
10
10
10
10
Turn the divider over
Finished front edge
I
J
I
J
Finished
front edge
I
J
I
J
D
B
Join the divider and
top
Push the top onto
the divider as
shown.
Use a screwdriver to
tighten the 2 large
locking nuts fitted to
the divider .
Note:
Turn the large
locking nuts as far as
they will go - more than
1/2 a turn.
3
D
D
10
3
Finished
front edge
Finished
front edge
10
Step
20
10
