-4
Step 3
Bed rail installation
Attention:
This step is very important and
related to use the bed rail in safe
condition, please follow the
instruction strictly.
After finishing,
you need verify the bed rail has
been installed securely.
min 25cm
min 25cm
Take away the mattress from
the bed, position the assembled
bed rail in place according to
the right drawing.
There must be a gap of at
least 25 cm (10 inches)
between each end of the
bed and the corresponding
end of the bed rail.
Put on the mattress.
Please ensure that the two
barrier parts are tightly
against the mattress when
in place.
Step 4
Bed rail operation
1). Lay down the bed barrier to
unlock: push the button and
lift the tube at the same time.
Lay down the barrier while
both locking pins coming out
of their sockets
.
2). Set up the bed barrier:
p
ush
the button and lift the tube to
center the locking pin in place.
Make sure the tube is lifted to
the top before lifting or laying
down the barrier.
D
on’t use the
bed rail when
one bed barrier
is set up only
.
Make sure the barriers are set
up securely before use.
