1
Safety and Care Advice
Important
– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers
for
inserting screws
,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
IMPORTANT, READ CAREFULLY -RETAIN FOR FUTURE REFERENCE.
ASSEMBLY:
Current legislation requires that the bunk bed must be fi tted with 4 safety-rails and a ladder or platform for
the upper bunk bed. The bunk bed meets the European EN 747-2012 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm. long and 90 cm. wide. The total thickness must not
exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Do not use the bed if any structural part is broken or missing. Be aware that children can
strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed/high
bed.
WARNING:
Children can become trapped between the bed and the wall. To avoid risk of serious injury the distance
between the top safety barrier and the wall shall not exceed 75 mm. or shall be more than 230 mm.
MAINTENANCE INSTRUCTIONS:
All assembly fastenings should always be tightened properly and that care should be taken that no fi ttings
are loose.
CLEANING:
LACQUERED:
Wooden, lacquered and painted as well as laminated surfaces should be wiped over with a
cloth and a mild soap.
OIL:
Oiled surfaces can be cleaned with soapy water, e.g. brown soap. Wipe with a clean cloth. To maintain
the natural life in the furniture which is provided by the oil treatment, we recommend an oil aftercare of the
furniture 1-2 times a year. The colourless natural oil for maintenance of oil-treated furniture is available at
your local furniture store.
