Installation
Installation
IMPORTANT!-The external flexible cable or cord of this luminaire cannot be
replaced. If the cord is damaged, the luminaire shall be destroyed.
Installation
1. Carefully remove all parts from their packaging.
2. Screw the gooseneck onto the upper tube. Pull the external fiexible cable
to its utmost. Screw the upper tube onto the lower tube. Screw the lower.
Tube onto the base.(see the figure). Take care that excess cable does not
become trapped or twisted when fixing tubes logether.
3.Assembly is now complete, plug in to test. The lamp is turned on and off
using the foot switch.
4.If the product fails to light, unplug before investigating.
.
Maintenance
Maintenance
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Technical Data
Technical Data Table
Specification
Value
Rating
220-240V~50Hz
Bulb
LED 3W
NOTE:The external flexible cable or cord of this
luminaire cannot be replaced. If the cord is
damaged, the luminaire shall be destroyed.
