w w w . a r g o n a u d i o . c o m
9
DAB Adapter 2+
3.2 DAB mode
The
Adapter displays the correct time after a full scan has been preformed for the first time.
(Normally done
automatically at first time installation). Your Adapter retrieves the time information
from a DAB station.
3.2.1 Scanning stations
There are two ways to scan for stations:
•
Automatic full scan (
autotune
)
•
Manual scan
To do an automatic full scan:
1.
Press
Auto scan
button <Full scan> will show in the display.
This may take a few minutes. When there scan is finished the first found station, starts to play
immediately.
2.
To preview another station, press
Arrow
buttons until the name of another station appears.
3.
Press the
Select
button to select and listen to the new station.
4.
You can also to a Full scan from the Menu. Press
Menu
button and use the
Arrows
to scroll to
Full Scan. Press
Select.
To do a manual scan
1.
Press and hold the
Menu
button.
2.
Press the
Arrow
buttons until the display shows <Manual Tune>.
3.
Press the
Select
button to activate manual tune.
4.
To choose a frequency manually press the
Arrow
buttons.
5.
Confirm by pressing the
Select
button.
