w w w . a r g o n a u d i o . c o m 3
BASS 12 & 15
Care and cleaning
We don’t recommend use of any solvents or
cleaners on Argon BASS12/15 cabinet, the
cabinet surface usually only requires dusting
or cleaning with a damp soft cloth (only use
cold clean water).
The grille fabric may be cleaned with a normal
clothes brush or vacuumed carefully with the
grille detached from the cabinet. Avoid
touching the drive unit, and do not use the
Subwoofer as a coffee or drinks table (risk of
water being spilled into the subwoofer).
Disconnect the Subwoofer from the mains
supply if taken out of use for a longer period.
Environmental information
Argon BASS12/15 Subwoofer complies with
international directives on the Restriction of
Hazardous Substances Electrical and
Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the
products must be appropriately recycled or
processed in accordance with these
directives. (RoHS) in electrical and electronic
equipment and the disposal of Waste.
Safety instructions
Please store this instruction manual for future
reference.
Do not use this product near water or
moisture. Clean only with a dry cloth. Unplug
this product from the wall outlet before
cleaning. Place the unit on a solid surface. Do
not block any ventilation openings. Do not put
it in a closed bookcase or a cabinet that may
keep air from flowing through its ventilation
openings. Do not install near any heat
sources, such as radiators, heat registers,
stoves or other appliances that produce heat.
Protect the power cord from being walked on
or pinched, particularly at plugs and the point
where they exit from the product. Servicing is
required when the product has been
damaged. Do not attempt to service this
product yourself. Opening or removing covers
may expose you to dangerous voltages or
other hazards.
Please contact the manufacturer to be
referred to an authorized service center near
you. To prevent risk of fire or electric shock,
avoid over loading wall outlets, extension
cords, or integral convenience receptacles.
Do not let objects or liquids enter the product.
Use proper power sources. Plug the product
into a proper power source, as described in
the operation instructions or as marked on the
product.
Rear panel and connections
01
Right/left Sound input from source or
stereo amplifier.
02
LFE is for connecting a surround sound
amplifier/receiver. (Crossover frequency is
not adjustable).
03
Link connection is for connecting an extra
subwoofer.
04
Subwoofer Volume adjustment.
05
Cross-over / Frequency adjustment.
06
Power On/Off indicator.
07
Phase adjustment.
08
Power mode setting switch
Off
: SUB is turned off,
Auto
: SUB is in auto standby/start up.
SUB will power up once Music starts
playing, and SUB will turn off automatically
if there is no Music.
ON
: the SUB will remain power on
continuously.
09
Power cable connection.
The power cable should be pulled from
socket if not used for a longer period.
10
Main power switch
See illustration on page 4 for explanation
