4
GALLIUM DISC 280A: 2. Frameset Inspection
Parts installed on the frame
Description
Screw Torque Detail
type Nm
Water bottle cage screws
Screw (4x)
5 mm
3 Nm
Grease
Chain stay cable guide
Screw (2x)
3 mm
1.5 Nm Grease
Seat post collar
M5 Screw (1x)
Socket head 4Nm
Grease
Seat post head
M5 Screws (2x)
Socket head 4.5Nm Grease
Rear derailleur hanger
M4 Screw (1x)
Flat head
2Nm
Loctite
BEFORE ASSEMBLING YOUR NEW GALLIUM DISC, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Frameset parts (see p.
5
)
2. Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
3. For reference, check serial number and write it on p.
2
4. All the necessary bolts (refer to Frameset Parts, p.
5
)
5. For optimal shifting performance, use a derailleur hanger alignment gauge to make sure that the derailleur hanger is straight (p.
11
)
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their
torque specifications.