Argon 18 ELECTRON PRO 245A, Инструкция по сборке, Страница: 8 / 28

8
ELECTRON PRO 245A: 5. Frameset Inspection
BEFORE ASSEMBLING YOUR NEW ELECTRON PRO, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Frameset parts checklist (see p.10)
2. All the necessary bolts (refer to Frameset Parts, p.9)
WHEN ASSEMBLING YOUR NEW ELECTRON PRO, MAKE SURE YOU FOLLOW THIS PROCEDURE:
3. Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
4. For reference, check serial number and write it on p.2
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their torque
specifications.
Parts installed on frame Description SKU Hex Key Torque Detail
1
Rear dropout inserts
6x FHCS_M4x8 Included in 81048 2.5mm 1.5Nm Loctite 242
2 Seat post clamp 1x SHSS_M8x16 Included in 80577 4mm 5.5Nm Grease
3 Seat post head chariot 2x SHCS_M5x16 80584 4mm 6Nm Grease
4 Fork steerer 1x SHCS_M5x12 N/A 4mm 5.5Nm Grease
5
Steerer module
1x SHCS_M6x45
Included in 81177
5mm 9Nm Grease
6 2x SHCS_M6x14
7 1x BHCS_M6x12 4mm 6Nm Grease
Aerobar assembly
8
Aerobar
1x SHCS_M6x30 80598
5mm 12Nm Grease 9 1x SHCS_M6x45 80599
10 2x SHCS_M6x20 80600
11
Extension clamp’s bottom
4x FHCS_M5x15 80590
3mm 5Nm Grease
12 4x FHCS_M5x25 80592
13 4x FHCS_M5x35 80593
14 4x FHCS_M5x45 80594
15 4x FHCS_M5x55 80595
16 Extension clamp’s top / bridge 4x FHCS_M5x18 80591 3mm 6Nm Grease
16 Armrests 4x FHCS_M5x12 80596 3mm 5Nm Grease