15
IMPORTANT: Install cable housing
before installing the bottom
bracket, crank, and fork.
Handlebar Section
Standard housing and metal cap
according to lever manufacturer’s
recommandations. For brakes
and gears, housing lengths may
vary depending on needs but
ideally they should all connect
without the barrels entering the
frame (triangular holes).
Note: For maximum braking
performance it is strongly
recommended to use the non-
compressible jagwire KEB housing
(Jagwire 5mmKEB-SL).
Suggested lengths of the cable housing inside the frame*
(the medium frame is used as a reference)
* Does not include handlebar section, as too many variations can occur.
Cable housing/length
A
FRONT brakes
(KEB 5mm)
NA
B1
REAR brakes
(KEB 5mm) 66cm
B2
REAR brakes rear section
(KEB 5mm)
13cm
C
FRONT derailleur
(LEX 4mm)
66cm
D
REAR derailleur
(LEX 4mm)
66cm
E-117 TRI+: 9. Cable Housing Installation
A
Rear
derailleur
Front
derailleur
Rear brake
Rear brake
Di2 cable
C
D
B1
1.5
1.6
B2