5
3
12
The console is the central point of the cable
and housing routing. Depending of the type
of assembly you will have to select the correct
assembly.
Tip: No mater the type of assembly you will
choose, always pass the brake housing first
starting from the back of the bike to the front.
1. With the rear brake housing coming from the
back of the bike, guide the end of the housing
through the hole on the frame’s down tube.
2. Use the brake housing to insert the foam line
into the downtube.
3. Guide the end of the housing through the
right side of the rectangular opening of the Di2
console cap (3)
4. Guide the Di2 cable coming from the
shifters through the grommet (4) and into the
rectangular opening of the console.
5. Guide the bake housing to the bigger hole of
the grommet (4).
6. Fix the grommet on the console.
7. Place the Di2 O-Ring (5) around the Shimano
EW-RS910 junction box.
8. Connect the front and rear Di2 cable to the
Shimano EW-RS910 junction box.
9. Clip the Shimano EW-RS910 junction box on
the console cap (3).
10. Fix the console cap to the downtube of
the frame with the screws.
Rear brake
housing
Di2 wire
DARK MATTER 282A: 10. Console /
A. Di2 internal junction box groupset
4