13
EN
caUtiON:
Never use flammable synthetic oil, petroleum based or aerosol lubricants to oil your
cutting system. Use only a vegetable oil based lubricant in a non-aerosol container with
extension nozzle.
Basic eXPlOitatiON rUles
it is not advised to cut as many shreets as indicated as the maximum capacity of the
shredder. By exploiting the machine at it's top capacity we significantly reduce it's vitality.
Therefore, to maintain a durable and faultless work of the shredder, it is adviced to place
no more then 70% of the maximum amount of sheets to be shred at one time indicated
for each model by the producer. The maximum amount of sheet should be used only oc-
casionally.
it is forbidden to shred more sheets then the maximum amount of sheets to be shred at
one time indicated by the producer. it may cause the blockade of the machine and massive
engine overloading, which will diminish shredder's durability or even damage it . also you
should not shred soft objects such as foil, paper towels, toilet paper or fabrics. Nor paper
with self-adhesive tape should be placed into the shredder. Those materials wrap around
and jam the knifes.
imPOrtaNt recOmmeNDatiONs / WarNiNGs
For your own safety please maintain particular care while installing and using the machine.
GeNeral
•
Keep hands, long hair, loose articles of clothing, jewellery and ties away from device
to avoid serious injury.
•
Unstable surfaces may cause the fall of the device, which can result in body injuries.
•
Please avoid fast stopping, use of additional force or surface unevenness while trans
-
porting the device on trolley, casters or table.
•
Do not remove mechanical and electrical securities such as locks, covers or others.
It is forbidden to use objects not dedicated to do so or liquids.
electrical
•
The machine should be plugged to the electric circuit only as presented in the manual.
•
The socket must be in close vicinity with easy access to the device. While moving the
machine, pull the plug from the socket.
•
To turn off the appliance unplug it from the socket. Socket should be in close vicinity
with easy access to device.
•
Do not use the machine when the wire or plug are damaged or after noticing symp
-
toms of machine’s damage. Please contact seller to obtain help.
•
When the device is equipped with a plug with grounding, then it has to be connected
to a socket with grounding!
© arGO s.a.
www.argo.pl
