16
EN
OFF
- This setting turns off all features of the shredder. For safety reasons, we
recommend that you leave shredder in the OFF position when it is unattended
or not in use.
Reverse
- In the unlikely event of a paper jam, use the reverse setting to help
clear the cutters of paper that did not pass through. IMPORTANT: Never at-
tempt to clear a jam using the reverse function until you have emptied the
wastebasket.
Forward
- The forward setting can also be used to help clear the cutters in the
event of a paper jam. This allows you to manually activate the shredder into
cutting mode.
LED STATUS INDICATORS:
Overheat
- Red LED light indicates the shredder has shredded continuously
beyond the maximum running time, has overheated, and will automatically
shut off. If this happens, switch the shredder to Off for 45 minutes or longer
before resuming normal operation.
Overload -
Red LED light indicates when too much paper is inserted. Use the
"Reverse" mode to back up and reduce number of sheets.
Open door -
Red LED light indicates the shredder basket or top lid is not clo-
sed properly. Shredders with pullout wastebaskets feature a safety power cut
off upon bin removal. Make sure the pull-out wastebasket is properly set back
into place and the blue “Power On” indicator is lit.
Bin full -
When basket is full, RED light will indicate it needs to be emptied.
While lit, the shredder will not operate until the wastebasket is cleared.
Feed error -
RED light indicates paper in the paper tray cannot be grabbed by
the feeders. Open lid to make sure papers are unfolded and positioned pro-
perly.
FEATURES:
Auto-Reverse Technology:
- When shredder detects over-capacity shredding,
the motor will immediately stop and reject paper
before actual shredding begins.
Energy Saving Auto Power-Sleep:
- This setting turns off all features of the shredder.
For safety reasons, we recommend that you leave
shredder in the OFF position whenever it is unat-
tended or not in use.
© ARGO S.A.
www.argo.pl
