Argo TA 46, Инструкция по эксплуатации, Страница: 4 / 6

4
EN
© ARGO S.A. www.argo.pl
TA46/TA33 Trimmers
model TA46 TA33
Cutting capacity (80g/m2) 8 8
Cutting length (mm) 320 460
Base dimensions (mm) 328x160 458x160
Read all instructions before using.
•
This product is not intended for use by children. Keep product out of the reach of
children.
•
This product is intended for use in trimming paper. Do not use the product for any
other purpose.
•
Keep loose items (e.g., hands, fingers, jewelry, clothing, neckties, etc.) away from the
blade to avoid personal injury or damage to the product.
•
Watch the sharp edges
To avoid damage to the product
•
Remove paper clips and staples from items before trimming paper.
•
Never lubricate the cutting blade.
•
Do not expose product to water or other liquids.
•
Always operate the product on a flat, level, steady surface to avoid it overturning.
•
Do not hang or wall-mount the product.
•
This product is intended for indoor use only. Do not use outdoors.
Save the instructions for future reference.
WAY OF USING
1. Put the trimmer on the flat, stable surface.
2. ensure that you place the material that you intend to cut beneath the transparent
plastic rails.
3. Place the paper or material that you intend to cut in the required position on the
cutting base.
4. Slide the cutting head along the edge of the metal cutting base.
NOTE!
it is forbidden to cut bigger amount of paper than stated in instruction, it could
cause sliding out the rotating blade over the cutting zone and cause the perma-
nent damages of blades.
There is a rule in all trimmers - the bigger amount of sheets cut at a time - the
smaller quality of cutting.