14
V 09/20
SLEEP BUTTON
Touch this button to activate the Sleep mode, the indicator on the display will flash for 10 seconds, after which all the
LEDs, including the one relating to the Sleep mode, will turn off. The appliance will operate at low ventilation speed. To
deactivate the Sleep function, touch any key on the panel, including the Sleep key.
FAN SPEED BUTTON
Touch this button to adjust the fan speed (low, medium, high, turbo).
UVC AND ION BUTTON
Touch this button once to turn on the UVC lamp (the icon
will appear on display), press twice to turn on the
Ionization (the icon will appear on display), press three times to turn off the UVC lamp, and press four times to turn off
the Ionization: the corresponding LEDs disappear from the display.
TIMER BUTTON
Touch this button to adjust the operating timer from 1 to 9 hours: the appliance stops automatically according to the set
time.
AIR QUALITY LED
The device is equipped with an air quality sensor, which shows the level detected in the room through the LED ring on
the display, color can change as follows:
LIGHT BLUE - Good air quality (minimum automatic ventilation)
YELLOW - Medium air quality (medium automatic ventilation)
ORANGE - Poor air quality (high ventilation speed)
RED - Bad air quality (Turbo ventilation)
When the “REPLACE FILTER” LED lights up on the display, it is necessary to replace the composite filter, available at
authorized service center.
To replace the filter, follow the instructions below:
Turn off the appliance and follow the instructions to replace the filter:
1. Remove the front panel from the top
2. Remove the composite filter by pulling the two tabs
3. Insert the new filter, taking care that the two tabs are positioned correctly outwards
4. Attach the pre-filter to the composite filter
5. Replace the front panel
6. Press and hold the Power button
for 3-5 seconds to reset the filter
REPLACEMENT OF COMPOSITE FILTER
