14
2)
U
nder fixed-angle swing status, press
button to adjust up
&
down swing
angle circularly as below:
Note:
operate continuously
left
&
right swing in 2 seconds,swing states will change
according to
above-mentioned
order, or switch closed state and
state;
(5) S
etting turbo function
1)
U
nder cool or heat mode, press
TURBO
button to set turbo function.
2)
When
is displayed, turbo function is on.
3)
When
is not displayed, turbo function is off.
4)
When turbo function is on, the unit operates in super high speed to achieve
quick cooling or heating. When turbo function is off, the unit operates in setting
fan
speed.
(6)
S
etting light function
T
he light on the receiver light board will display present operation status. If you
want to turn off the light, please press L
LIGHT
button. Press this button again to
turn on the light.
(7) W
iewing ambient temperature
1)
In unit on status, receiver light board or wired controller is defaulted to display
setting temperature. Press
T
EMP button to view indoor or outdoor ambient
temperature.
2)
When
is displayed, it means the displayed temperature is setting
temperature.
3)
When
is displayed, it means the displayed temperature is indoor ambient
temperature.
4)
When
is displayed, it means the displayed temperature is outdoor
ambient temperature.
Note:
setting
temperature is always displayed in
R
emote Controller.
(8) S
etting
X
-FA
N
function
1)
In cool or dry mode, press
X
-FA
N
button to set
X
-FA
N
function.
2)
When
3)
When
is displayed,
X
-FA
N
function is on.
is not displayed,
X
-FA
N
function is off.
4)
When
X
-FA
N
function is on, the water on the evaporator will be blown away
until turning off the unit to avoid mildew.
Infrared
R
emote Controller
for
H
igh-Wall fan coils
