background image

V 05/21 

 

 

15 

GENERAL SAFETY INFORMATION 

  Use this convector only as outlined in this manual. Any other use not 

recommended by the manufacturer may cause fire, electric shock or 
injury to persons. 

 This convector is designed for domestic use. It must not be used for 

commercial or industrial purposes. 

 Ensure that the mains voltage complies with that indicated on the 

convector data plate (230-240V~ 50-60 Hz). 

 This appliance can be used by children aged from 8 years and 

above and people with reduced physical, sensory or mental 
capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in a 
safe way and understand the hazards involved. 

  Children shall not play with the appliance.  

 Cleaning and user maintenance shall not be made by children 

without supervision. 

  Remove the convector from its packaging and check that it is in good 

condition before use. Keep any plastic bags away from children. 

 Check the cord and plug before using the convector to ensure that 

they have not been damaged during transport. 

  This product is not a toy. 

 Children under the age of 3 must be kept away if not continuously 

supervised. 

  Children aged between 3 and 8 must only turn the appliance on / off 

as long as it has been placed or installed in its normal operating 
position and that they receive surveillance or instructions regarding 
the safe use of the appliance and understand the dangers. 

 Children between 3 and 8 years of age must not insert the plug, 

adjust or clean the appliance or carry out maintenance by the user. 

CAUTION - Some parts of this product can become very hot and 
cause burns. Particular attention has to be given where children 
and vulnerable people are present. 

WARNING: In order to avoid hazard due to inadvertent resetting of 
the thermal cut-out, this appliance must not be supplied through and 
external switching device, such as a timer, or connected to a circuit 
that is regularly switched on and off by the utility. 

WARNING

do not use the convector with a controller or any 

other external device that activates the appliance automatically, 

Содержание FANCY














Отзывы: