Argo ECOFC45HL, Руководство пользователя и инструкция по установке, Страница: 8 / 38

FAN button
I FEEL button
4
5
6
7
Pressing this button can set fan speed circularly as: auto (AUTO), low( ) ,medium
( ), high( ).
Note:
Ɣ 8QGHU AUTO Speed,IDU fan motor will adjust the fan speed (high, medium or
low speed) according to ambient temperature.
Ɣ )DQVSHHGXQGHUGU\PRGHLVORZVSHH d.
Press this button to start I FEEL function and " " will be displayed on the remote
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappear.
Ɣ 3OHDVHSXWWKHUHPRWHFRQWUROOHUQHDUX ser when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
Press this button to set HEALTH function ON or OFF. After the unit is turned on, it
defaults to HEALTH function ON.
Press this button to select AIR function ON or OFF.
button
button
(Only available for some models)
Ɣ 7KLVIXQFWLRQLVDSSOLFDEOHWRSDUWLDORIPRGHOV
Auto
+/- button
3
Ɣ 3UHVVRUEXWWRQRQFHLQFUHDVHRUGHFUHDVHVHWWHPSHUD ture 1
ć
.
Holding "+" or "-" button, 2s later, set temperature on remote controller will
tor on indoor unit will change accordingly. (Temperature can’t be adjusted under
auto mode)
Ɣ :KHQVHWWLQJ TIMER ON, TIMER OFF or CLOCK, press "+" or "-" button to
adjust time. (Refer to CLOCK, TIMER ON, 7,0(52))EXWWRQV:KHQVHWWLQJ
TIMER ON, TIMER OFF or CLOCK, press "+" or "-" button to adjust time. (Refer
to CLOCK, TIMER ON, TIMER OFF buttons)
Ɣ :KHQ,)((/IXQFWLRQLVWXUQHGRQWKHUHPRWHFRQWUROOHUVKRXOGEHSXWZLWKLQWKH
area where indoor unit can receive the signal sent by the remote controller.
)ORRU&HLOLQJ7\SH8QLW