10
V 06/16
Do not connect the appliance to the mains power before it has been properly
assembled and positioned.
Do not run the cord under carpets. Do not cover the cord with blankets,
carpets or similar materials. Place the cord far away from busy areas or where
it cannot be accidentally pulled-out.
Do not operate the halogen heater in close proximity to bathtubs, showers,
washbasins or pools.
Do not position the halogen heater below a socket outlet.
Do not operate the appliance outdoors.
Upon initial start-up, the halogen heater may emit a slight, harmless smell.
This smell is a normal effect of the initial
heating up of the internal heating elements, and should not recur later on.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE
SOLE MEANS OF DISCONNECTING POWER. WHEN SERVICING OR
MOVING THE HALOGEN HEATER, ALWAYS UNPLUG THE POWER
CORD.
A halogen heater has hot and arcing or sparkling parts inside. It must not be
used in potentially dangerous locations such as flammable, explosive,
chemical-laden or wet atmosphere.
Do not place the halogen heater on soft surfaces, like a bed, where openings
may become blocked. Always place the halogen heater on a stable, flat, level
surface when operating, to avoid the chance of the halogen heater
overturning. Locate the power cord so the halogen heater or other objects are
not resting on it.
Always unplug the halogen heater when not in use.
In order to avoid accidents turn unit off if unattended.
In the event of any problems (abnormal noise or a strange smell) switch off
the appliance immediately, do not
attempt to repair it and take it to your local after sales service.
ASSEMBLY INSTRUCTIONS
Let the power cable go through the fairlead located in the central part of the base and assemble the body and the base of
the appliance with the two screws.
Position the unit on a flat, stable surface.
When you move the appliance, use the handle.
