manualshive.com logo in svg

Argo 1997 BF, Руководство по обслуживанию

Поделиться
Скачать
Argo 1997 BF Скачать руководство пользователя страница 91

Argo Service Manual                        Electrical System

Ontario Drive & Gear Limited                                                                                             www.odg.com
PH.(519)- 662-2840   FAX (519)- 662-2421

ES-21

5.

Remove the 2x4's used to space the upper and lower body apart and re-rivet the two

back together using the required body rivets and washers.

7.

Replace the radiator overflow bracket and bottle to the front of the vehicle.  Install

the lid and connect the overflow hose.

8.

Install the engine access cover.

‹

On Conquests manufactured from CB17117:

1.

Fasten the blower fan to the molded plastic intake duct orienting the fan outlet fac-

ing down towards the bottom of the vehicle.  See Photo ES-31 on previous page.

2.

Reconnect the fan wiring

3.

Reattach the brake cooling hose and secure with the gear clamp.

4.

Remove the 2x4's used to space the upper and lower body apart and re-rivet the two

back together using the required body rivets and washers.

6.

Install the engine access cover.

5.

Slip the rubber bumper back on.

6.

Slip the rubber bumper back on.

Содержание 1997 BF























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды