ARGENTO Piuma-S, Руководство пользователя, Страница: 15 / 20

1 1 5 5
7.3 Checking the parts
The supporting frame of the pedal-assisted bicycle and the welds must be free of
visible defects such as: cracks, deformations, incisions, corrosions, etc.
Make sure that all the bolts and pedals of the pedal-assisted bicycle are properly
tightened.
Check the condition and fastening of the battery, the sheaths of the electric cables
must be in good condition and the terminals must be tight and not corroded.
Check the battery charge status by means of the indicator on the handlebar display.
For a correct use of the battery of your EPAC vehicle it is suggested to always
charge the battery after each use of the bike.
Using the specific inflation valve on the rims, check the tire inflation pressure using
a compressor and a gun with pressure gauge.
Check the condition of the tread, the rim and the fastening of the rims to the hubs.
In case of tire replacement, contact the After-Sales Service or a qualified tire dealer.
Do not change the tension of the spokes: the adjustment must be carried out by
specialized personnel and with suitable means.
The brakes must be adjusted so as to ensure effective braking and at the same
time the control levers must have an adequate stroke to be able to modulate the
braking: in other words, the brakes must be neither too slow nor too tight.
8. LCD DISPLAY
8.1 Foreword
The pedal-assisted electric bicycle is equipped with an LCD display for complete
management of all the functions provided for your bike.
8.2 Switching On/Off
Press and hold the ON button for at least 1 second to turn the LCD display on / off.
8.3 Assisted pedaling (PAS)
Press the + or - button to increase or decrease the PAS level (pedal assist mode).
Level 9 is the maximum selectable level and provides the maximum possible help
from the motor of the pedal-assisted bicycle, on the contrary level 1 provides the
minimum help from the motor. Level 0 does not provide help from the
engine.