Last Number Redial:
1.
Pick up handset.
2.
Press redial on left arrow.
3.
Arrow up or down to the number you wish to call back
4. Press # to call the number
To Establish a Conference Call:
Establish first call. Press (
CONF
) in disp. Dial second number. Press
(
Add
) in Disp. Repeat the previous step to add more parties
and Press (
Begin
) to connect all parties.
Using your Headset:
Press the headset key to make or answer a call and press the
headset key again to hang up. If you are using a wireless headset
with a lifter a headset key is not required.
To change the display name for an extension:
Press
SPKR,
dial 700, enter extension number, spell out name on
the KEY PAD. When complete, press
HOLD
, you will hear two con-
firmation beeps, press
SPK
to save.
Station Speed Dial (Up to 10 Numbers for each phone)
1. Press Speaker and dial 755
2. Dial the speed dial location number 0
-
9, 0 being the last
3. Dial 9 plus the number as you would normally dial it.
4. Press Hold
5. Enter the name (see table on the next page)
6. Press Hold
To use a station speed dial
1, Press the key under the
Dir
in your display
2. Press the key under
Sta
in your display
3. Press the up or down arrow to find the number you wish to dial
4. Press speaker or pick up the handset.
Or
1. Press Speaker and Dial #7
2. Dial desired bin# for the number you wish to call (bin 0
-
9).
Using your Mic Key:
If your
Mic
key is not lit and someone calls you, you will be muted
to the caller. Press your
Mic
key to enable (Lit red) or disable/
mute (unlit)
To Program and Use the System Speed Dial Directory:
1. Press SPKR dial 753 dial BIN # (000
-
9999)
2. Enter the phone number to be stored, press Hold.
3. Using Key Pad spell name (see table below), press Hold to store
the number. (If using another letter on same key, press # twice
for space).
To use
1. Press key below DIR in the display.
2. Press the key below ABB in the display.
3. Start scrolling or press the letter on key pad then scroll it will
take you to the proper directory,
4. Press the key under Dial in the display to place the call.
Or
1. Press Speaker and dial #2
2. Dial the desired bin number (000
-
9999)
