Page 5
Operating Instructions: ARG-RX900M Mini Receiver
1. Plug the headphone/earphone into the 3.5mm audio output jack located on the top of the receiver
housing. Do not bunch up the cord, wrap it tightly around your body or wrap it around the receiver
housing. Use only Talk & Listen® approved headphones/earphones, substitutions can greatly affect
the overall performance and cause poor audio quality.
2.
Turn the power switch of the Receiver to “ON”. The LCD will turn on and remain on until the power is
turned off. The display will show the Channel Number for a second and then change to Volume Level.
The LCD backlight will turn off after 5 seconds and will turn back on with the push of any button. The
LED will turn green indicating the power is on; green flashing indicates low battery.
3.
Volume Control: To adjust, use the “+” and “-” buttons on the front panel to adjust the volume level
from 0-16 (0 being the lowest setting and 16 the highest setting). The number located on the LCD
display indicates the volume level setting.
4. Confirm that the channel number on the receiver(s) matches the channel number on the transmitter.
To adjust the channel number, press and hold the “SET” button until the Lock icon disappears and
the channel number appears.
Use the “-” or “+” buttons to scroll through the channel numbers (01 –
25), the channel will be set once the backlit screen goes off and the Lock icon appears.
5. When finished using the R
eceiver, slide the “ON/OFF” switch to the “OFF” position.
1.
Signal Strength
2.
Channel or Volume Icon and its value
3.
Lock Icon
4.
Battery status (when the battery status is low, please charge the device soon)
1
2
3
4
