14
GILMORE-
Item code:BH62.
INSTRUCTION MANUAL
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
1.
Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage.
Fuel tank
INSTALLING THE THROTTLE SERVO.
Throttle servo
Throttle servo
Secure.
Cut
COWLING.
