arf 70 Series, Инструкция по сборке

Страница: 8 / 16

Use a rotary cutting tool and sanding drum to cut out the openings in the cowl.
The shape and size of open pore depends on the type of the engine.Install the
cowl and check that everything fits correctly and nothing rubs
against cowl.
If needed enlarge the cutouts and test fit again until everything fits correctly.
Drill four holes and install the engine on the engine mount with four
M4 screws
.
And then install the mount to the firewall board with the
screws and claw nuts
.
The Four screws should be secured with Blue
Loctite
.
Finally
,
install the throttle serve and the throttle pushrod
.
Fuel Tank Installation