32
E
N
G
L
I
S
H
LED functions:
Red LED LED is on when the BS-1000 is powered on.
Blue LED Blinks when the BS-1000 receives sensor data
Green LED
– Off: network and flash memory storage are not active
– On: network not active, flash storage active,
– Blinks short on and long off: network active, no flash storage
– Blinks long on and short off: network active, flash storage active
Software Installation
Prior to using the BS1000 via USB, you have to install the supplied software
on your PC. Insert the supplied CD-ROM into the CD drive of your PC (always
check the latest Software version on our website). After insertion the instal-
lation wizard will appear. If the automatic set up has been disabled in your
Windows software, you can activate the window by opening the Explorer file,
go to the CD drive and double-click on the default.htm file.
Select your language on the installation screen and then select the installa-
tion option. Follow the instructions on the screen.
Please update regular the multiloggersoftware!
SEE: WWW.AREXX.COM
Installation of the receiver
Once you have installed the software and connected the BS1000 to the 7V
power supply, you can connect the receiver module (BS1000) to your com-
puter via the supplied USB lead. Windows will now start installing the re-
quired RF_USB driver. Depending on your Windows version, the installation
process may slightly vary.
When the installation is complete, click on ‘Finish’.
Once the driver has been installed, you can start the application.
You can start the program via the start menu:
Start->All Programs->Temperature-Logger.
On the left side a (still empty) sensor list is displayed. On the right side is a
space for a graphic display of the measured temperature curves. On the left
bottom side of the screen a status bar displays the message ‘Ready’.
Use the Help function for more information about the loggersoftware.
