![ARESA AR-3303 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/aresa/ar-3303/ar-3303_instruction-manual_2967134005.webp)
IMPORTANT SAFEGUARDS
TECHNICAL SPECIFICATIONS
Please read this instruction manual carefully before using the appliance.
Save the instruction manual as you may require it in future.
This device is designed for for modeling and styling hair. For household use, not suitable for industrial use.
The device is intended for use only for domestic purposes in accordance with this Instruction Manual.
After unit transportation or storage at low temperature it is necessary to keep it for at least 4 hours at room temperature
before switching on.
Service lifetime - 3 years
Warranty period - 12 months
ENGLISH
OPERATION
TRANSPORTATION. Transportation of the device is necessary by any kind of covered transport with the application of cargo securing rules
ensuring preservation of the
presentation of the product and / or packaging and its further safe operation. DO NOT expose the device to shock loads during handling
operations.
CLEANING. The device doesn't need maintenance and doesn't contain any parts that require user intervention.
For cleaning, first disconnect the device from the mains supply, let them cool down. Always clean only fully cooled hair-straightener. Wipe the
handle with a soft, slightly damp cloth. Do not allow water to enter the handle.
STORAGE. The device must be stored indoors, in conditions that presume the preservation of the presentation of the product and its further safe
operation. Make sure
that the appliance and all its accessories are completely dried, before storing it. To avoid damaging the cord, do not wind it
or hang by the
power cord.
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 28-3
4
W
Be carefu during operation, do not allow the heating element of the device to come into contact with unprotected skin. The working area is
heated to
22
0 ° C.
Attention: Place the device on a level, stable and heat-resistant surface.
Avoid touching heated surfaces with a power cord.
Your new device has a protective coating of the heating element. At the first start-up and heating, a short, brief smoke and odor may
appear. It is safe to use and does not mean a defect of the device. When using it for the first time, wait until smoke and odor cease. This can last
no more than 30 seconds.
Operation mode of the device: after 30 minutes of operation, break for at least 15 minutes.
Wash the hair before setting it. For achieving the best result thoroughly wash the hair after using hair conditioner. Dry the hair with a towel.
• It is recommended to use a detangler before operating the device.
• Do not manipulate the same strand of hair for too long. • When setting your hair manipulate hair strands evenly.
Unwind the power cord to the full. • Connect the appliance to the mains.
• Set the ON/OFF switch to "ON" position. The operation indicator will light.
• After a few minutes the device will heat up. • Separate the hair strand width of 2-4 cm.
• Hold a strand between the working surfaces of the heating elements. One working surface of the cylinder is two, the other - one. With these
cylinders wave comes naturally. • Move from the roots to the tips.
After the use don’t touch the plates, leave them to cool.
• Read this manual carefully before operating the unit to avoid damage during use. Incorrect handling can lead to damage to the product, cause material
damage or cause damage to the health of the user.
• Before switching on, check that the product specifications match the mains voltage.
• The device is not intended for use by persons (including children) with reduced physical, sensory or mental abilities, or lack of experience or knowledge,
if they are not controlled or instructed aboutuse of the device by the person responsible for their safety.
• Use only for domestic purposes in accordance with these operating instructions. The device is not intended for use in commercial and / or industrial purposes.
• Do not spray hair styling products while the appliance is running.
• To reduce the risk of electric shock, do not immerse the appliance in water or other liquids. If this happens, DO NOT BECOME for the product, immediately
unplug it from the electrical outlet. Do not put your hands in water. Contact an authorized Service Center for verification.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use outdoors or in high humidity, especially in the immediate vicinity of a bath, shower or pool.
• When disconnecting the appliance from the mains, hold the plug by hand, do not pull on the power cord.
• Always unplug the appliance if it is not in use.
• Do not leave the appliance switched on unattended.
• Do not use attachments not supplied with this unit.
• Do not carry the appliance by the cord.
• Do not repair the appliance yourself. Take it to an authorized Service Center.
• Do not use the appliance with a damaged power cord or plug, or if it has been exposed to liquids, dropped or was
damaged in any other way. Do not attempt to disassemble and repair the device yourself, contact the service center.
• Do not allow the power cord to touch sharp edges or hot surfaces.
• Before turning on the unit, make sure that the On / Off switch is off.
• Do not use the device for laying synthetic wigs.
• Avoid overheating and direct sunlight.
• The manufacturer reserves the right, without additional notice, to make minor changes in the design of the product, work, and functionality.
When using the device in the bathroom, it is necessary to disconnect the appliance from the mains after use, since the proximity of water is dangerous, even
when the device is turned off.
.
• For additional protection, it is advisable to install a residual current device (RCD) in the bathroom with a rated with an operating current not exceeding 30 mA.
Seek advice from a qualified technician.
ATTENTION! Do not use the appliance near water in bathrooms, showers, swimming pools, etc.