QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
Full manual available to download from: www.Ares-RC.com
5
With the battery correctly
connected the CHG (charge) light
on the transmitter will glow solid
yellow indicating that it is charging.
Note that it is not necessary to
switch the transmitter on to initiate
charging.
6
A fully discharged battery will be
charged in under an hour, at which
point the yellow light will stop
glowing. The battery is now ready to
use and can be disconnected from
the charge lead.
7
Pull the throttle stick back to its
lowest point and switch ON the
transmitter.
8
Connect the lead on the underside
of the model to the battery
(making sure to align the red dots
as before) and use the magnet
retainer to clip the battery in
position with the plug end facing
the tail.
9
Having plugged in the Li-Po the rudder and
elevator control surfaces will move, indicating
that the 3-in-1 control unit has initialized and
that the motor is armed. Raising the throttle
stick will now start the motor. In the unlikely
event that the initialization process fails,
follow the pairing instructions at the back of
this manual.
