Ares Ethos FPV Скачать руководство пользователя страница 9

9

Charging the LiPo Battery

You must charge the included 1200mAh 2-Cell/2S 7.4V 25C LiPo Battery 

(AZSZ2503) using only the included AC LiPo Balance Charger (AZSZ2504) or 

a suitably compatible LiPo battery charger. Charging the LiPo battery using 

a non-LiPo battery compatible charger (such as a NiCd or NiMH battery 

charger), or even a different LiPo battery charger with the incorrect 

settings, may result in damage to the battery or even fire resulting in 

property damage and/or personal injury.

Plug the AC/DC adapter into your AC power (wall plug) and plug the bar

-

rel connector into the end of the balance charger (AZSZ2504). The GREEN 

power LED will light. With both the balance charger and the flight battery 

(AZSZ2503) placed on a non-flammable surface, plug the balance plug from 

the flight battery into the balance port on the charger. The RED charging LED 

will light, when the RED charge LED goes out the charge is complete. 

WARNING:

 

• 

          Do not charge LiPo batteries unattended. 

• 

          Always charge on a non-flammable surface.  

Содержание Ethos FPV

























Отзывы: