Ares AZSQ3350, Руководство пользователя

Страница: 13 / 26

13
3. When the battery is connected the LED lights will flash. Place the Recon on
a level surface to enable the on-board gyro to be properly calibrated.
4. With the throttle in the low position, Switch the transmitter ON by pressing
the power button. The quad’s LEDs will now stop flashing and emit a solid
light indicating that the Recon and the transmitter are paired.
5. Arm the motors by pushing the throttle stick forward to its stop (Pic A), then
back to its lowest point (Pic B). Your Recon HD is now ready to fly. Before
taking off move the quadcopter to a clear / open space that’s free of
people, animals and obstacles, then stand clear yourself. Position the quad
with the battery cover facing you and the camera facing away. If you’ve
never flown an R/C quadcopter before, read the section entitled ‘Flying Your
Recon HD’.
Flying Your Recon HD
Where quadcopter flying is concerned it’s not possible to have too much space.
As such, we recommend that you fly your Recon in a large enough area to
ensure that control is relaxed and you have time to think. If flying outside we
also recommend that early flights be carried out in calm conditions.
If you’re new to R/C quadcopters set the Agility Mode to ‘Low’ before flying and
take things gently to give yourself time to get familiar with the sensitivity of the
controls. R/C flying is a skill that requires practice to master, so be prepared to
undertake many flights before you get proficient. The following is a list of the
controls you have at your disposal. Make sure you familiarize yourself with their
effect on the quadcopter before you fly it.
(Mode 2 Transmitter Shown)
(Mode 2 Transmitter Shown)
A
B