3
10019
2
10019
WARNINGS:
Follow these safety precautions in order to avoid damage and ensure caliper stays Functioning optimally.
• DO NOT get calipers wet. Avoid coming in contact with any liquids or excessive humidity.
• DO NOT leave calipers exposed to excessive heat or direct sunlight.
• DO NOT disassemble or tamper with this device.
• DO NOT expose to electromagnetic fields.
• DO NOT ever apply any voltage on any part of the caliper and never use an electric pen or permanent
damage may occur.
• Pull out the battery protector before use.
5. Buttons
--‘mm/inch’ is for metric and inch conversion
--‘ON/OFF’ button is to turn on or turn off display
--‘ZERO’ is to set the reading on display to be zero.
6. Zero Out Device before use
- Caliper should be checked before each use to make sure that it is
properly zero set. The reading should be zero when the external jaws are closed, otherwise press ‘ZERO’
to set zero reading. Open and close the external jaws to verify if reading return to zero.
7.
Always apply constant force during measurement and zero setting.
OPERATION:
TROUBLE SHOOTING:
BATTERY REPLACEMENT & WARNINGS:
When digits are flashing on the LCD display this indicates that the battery power is low. Remove the
battery and replace with a new battery. (Positive side facing up)
WARNIG: Follow all safety instructions below for handling and disposing of batteries.
• DO NOT Short circuit batteries.
• DO NOT keep batteries near excessive heat, fire or in direct sunlight.
• Remove batteries from device when not being used for long periods of time.
• NEVER handle leaking batteries and do not dismantle batteries.
• RECYCLE used devices and batteries via local electronics recycling facilities or means.
After each use wipe clean with a soft cloth. DO NOT use any solvents to clean the device. DO NOT
immerse in liquid of any kind.
If water damage causes the device to fail. Wipe off the liquid and make sure between the slide and scale
is completely dry. Reset the caliper by removing the battery for 1 min. Reinstall the battery and turn on
the device.
CARE AND MAINTENANCE:
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
1
2
3
4
5
6
mm
in
in/mm ON/OFF
mm
ZERO
8.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
1
2
3
4
5
6
mm
in
in/mm ON/OFF
mm
ZERO
8.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
1
2
3
4
5
6
mm
in
in/mm ON/OFF
mm
ZERO
8.0
4. Depth Distance Measurement
1. Inner Distance Measurement
2. Outer Distance Measurement
3. Step Distance Measurement
0
10
20
30
40
50
60
70
80
90
100
11
0
120
130
140
150
1
2
3
4
5
6
mm
in
in
/mm
ON/OFF
mm
ZERO
8.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
1
2
3
4
5
6
mm
in
in/mm ON/OFF
mm
ZERO
8.0
Display does not show information
Digits are not displaying correctly on screen
Digits are flashing on screen
Check battery contact and battery health
Reset the Device – Remove the battery for 1 min
then reinstall and restart.
Battery is low. Replace Battery
Problem
Action
